Test bench validation boot

I had recently swapped out the fans in my main pc to a 5 pack of arctic P12 pro fans, I have a 360mm rad, so I had two of the fans left. I then took the stock corsair ML120 RGB fans on the aio of my test bench and swapped them with the p12 pros as well because they should theoretically offer some better performance, at least in the CFM department. Spoilers...They do not, but at least they arent worse, and on the upside, they are easier to cable manage, not that it matters on an open air bench. 

The test bench is as follows:

I7 990X overcloocked to 4.3 ghz at 1.4v

(uncore x26, 133 bclk, 32x cpu multiplier, low load line calibration, 1.335 QPI/VTT, 1.9v PLL, 1.24 QPI PLL, 1.6v VDDR)

Gigabyte X58 G.1 Sniper 

12 GB crucial ballistix elite DDR3 1866 (OC stable 2133)

gigabyte GTX 1070 windforce 3X OC

bullshit 750w psu

Corsair h100i rgb platnium

2x 120 mm fans ripped from a corsair 4000d airflow to cool the motherboard VRM/memory modules

Cinebench run in the screenshot finished with a score of 996 multi core, 68c under load.